Dr200..I want to Jet it out
#2
04-04-2008 | 02:15 PM
Junior Member
Joined: Apr 2008
Posts: 2
RE: Dr200..I want to Jet it out
Here is what I did to my '96DR200SE - foundthis on the web somewhere and it worked very well and sounded real nice!
1) drilled a few 5/16" holes in the airbox for more air flow
2) put on FMF Turbine Core2 pipe (its meant for a 2 cycle universal fit but itfits nice with little modifications)
3) experimented with jetting and ended up with a 140 main jet - spark plug was always the proper color so it wasn't too rich or too lean. also had to adjust the low speed mixture.
Here's a pic of the pipe on it.
http://members.aol.com/rbris66/images/96dr4.jpg
1) drilled a few 5/16" holes in the airbox for more air flow
2) put on FMF Turbine Core2 pipe (its meant for a 2 cycle universal fit but itfits nice with little modifications)
3) experimented with jetting and ended up with a 140 main jet - spark plug was always the proper color so it wasn't too rich or too lean. also had to adjust the low speed mixture.
Here's a pic of the pipe on it.
http://members.aol.com/rbris66/images/96dr4.jpg
Thread
Thread Starter
Forum
Replies
Last Post
