Electrical help needed
I just finished (well - thought so) a 2 year re-build of a backyard find. Put the new battery in my 1982 GS450LZ and the only lights that came on are the oil and neutral. Clicked into first gear and the gear indicator works also. Other than those 3 things nothing....... No lights of any kind and no starter, no horn.
Any ideas on where to start looking? :confused: The fuse (I only found one during the re-build) is fine. Any and all help will be greatly appreciated. Thanks. PS The bike did run (for about 2 seconds at a time) before I started the re-build. Lights worked, etc. Not sure how it ran with the carbs so plugged, but it did. |
Hello Bill,
One thing to check is the battery for charge/condition. Make sure it has at least 12.5vdc & if it is liquid filled ensure all the cells are filled above the lower mark. Hope this helps. Chooka. |
Hi,
Welcome to this forum sites. This forum site is useful for us. And sorry for your question because i am not able to get your question. Please consult your friends. Sorry for that. Thanks ----------------------------------------------------- 2013 MERCEDES BENZ SL-CLASS |
Nice post.......................,
|
useful....., dear
|
Most DC wiring problems come from poor grounding.Make sure you have good vehicle ground and then trace for power to each electric circuit
|
PS The bike did run (for about 2 seconds at a time) before I started the re-build. Lights worked, etc. Not sure how it ran with the carbs so plugged, but it did.
---------------------- Another Success Story for DVDs --- One Tree Hill Season 9 DVD,miss it when you lose it! |
Make sure it has at least 12.5vdc & if it is liquid filled ensure all the cells are filled above the lower mark.
Hope this helps. ------------------------------ Gaining Truth of Life From TVs --- One Tree Hill Season 9 DVD, Just Enjoy Yourself for Fun! |
I have an residence for Lease and was inquisitive of what are my alternatives in a scenario where the renter chooses to not pay the rent promptly or at all!?
After the agreement is finalized by the renter with the appropriate conditions, but not followed. |
This community website is useful for us.
And sorry for your query because i am not able to get your query. |
Yes you have to found some screw driver and put out those lights from there and then buy some new light and install them on that place I hope your problem will be solved. If you face same problem after that you have to found a hammer and beat the light with full power.
|
hiiiiiiiiiiii
welcome to this forum site i am from india i am a new user of this forum site sorry but iam not able to give your answer i advised you please contact to your friends dainik bhasker |
hii
welcome to this forum site i am new user of this forum site i am not able to give your answer please contact to your friends thanks dainik bhasker |
Help needed with electrical/electronic project?
Hi, thier i am currently a second and final year student in college studying electrical/electronic engineering? i need help with deciding what to build for my project, its supposed to be something basic with at least 7 components such as resistors, diodes, transistors etc. and the circuit board which am planning to use pcb. i need help with the basic circuit and guide on how to build probably a solar powered battery charger or stereo audio amplifer with parts not costing over £20. or any other basic project ideas. am not asking for anyone to do this for me. i am just asking for anyone whos probably done this before for some help on what to do because i dont have a clue. |
One thing to check is the battery for charge/condition.
Make sure it has at least 12.5vdc & if it is liquid filled ensure all the cells are filled above the lower mark. PLEASE GO TO MY WEBSITE AND REVIEW ON THIS HERE YOU CAN GET THE LATEST NEWS AND ROCKING NEWS ---------------------------------- dainik bhasker |
Electrical advice needed?
what type or gauge wireing should i use to run power from the main breaker box of the main house to a seperate breaker box approx - 30 yards away to set up power to a small 2 room apt , for the best continuity the thickness and the gawg is what im worried about mostly .also it will be about 10 feet to 15 feet high from house to house. how many lines should i run ? thank you for you time to help.
|
Make sure it has at least 13.5vdc & if it is liquid filled ensure all the cells are filled above the lower mark.
Hope this helps. this is very good post and if you want to get more please dainik bhasker |
Make sure it has at least 12.5vdc & if it is liquid filled ensure all the cells are filled above the lower mark.
Hope this helps. this is nice post PLEASE GO TO MY WEBSITE AND REVIEW ON THIS HERE YOU CAN GET THE LATEST NEWS AND ROCKING NEWS ---------------------------------- dainik bhasker |
I recently came across your article and have been reading along. I want to express my admiration of your writing skill and ability to make readers read from the beginning to the end. I would like to read newer posts and to share my thoughts with you.
Karen Millen Outlet North Face Jackets Outlet Moncler Vestes Moncler Outlet |
Make sure it has at least 12.5vdc & if it is liquid filled ensure all the cells are filled above the lower mark.
Hope this helps |
Make sure it has at least 12.5vdc & if it is liquid filled ensure all the cells are filled above the lower mark.
------------------------ We Creat New Fashion for DVDs, Running for Your Desired buy now |
Electrical help needed
Of all the bad luck, Someone decided that they needed all three batteries from my fathers 17' Bass Tracker with 55 HP Nissan.
|
All times are GMT -5. The time now is 10:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands