2001 rm 250 rear wheel bearing problems
 

i got the wheel off but my manual is tellin me i need a special tool..do i really need one or naw..and if not how would i get them out so i can put new ones in???

Wheel bearing
 

Hey
i just took a long metal shaft and knocked them out. Put the wheel on it's side with some blocks of wood underneath so the bearing is not blocked. Then you have to move the center piece to the side just enough to get something down in there to hit against the bearing edge. Be sure to switch sides you hit bearing on. Flip rim over and do the other side. I used the old bearing to hammer new ones in so I wouldn't damage new bearings.