Yes you have to found some screw driver and put out those lights from there and then buy some new light and install them on that place I hope your problem will be solved. If you face same problem after that you have to found a hammer and beat the light with full power.

hiiiiiiiiiiii
welcome to this forum site
i am from india
i am a new user of this forum site
sorry but iam not able to give your answer
i advised you please contact to your friends


dainik bhasker

hii
welcome to this forum site
i am new user of this forum site
i am not able to give your answer please contact to your friends
thanks
dainik bhasker

Help needed with electrical/electronic project?
Hi, thier i am currently a second and final year student in college studying electrical/electronic engineering?

i need help with deciding what to build for my project, its supposed to be something basic with at least 7 components such as resistors, diodes, transistors etc. and the circuit board which am planning to use pcb.

i need help with the basic circuit and guide on how to build probably a solar powered battery charger or stereo audio amplifer with parts not costing over £20. or any other basic project ideas.

am not asking for anyone to do this for me. i am just asking for anyone whos probably done this before for some help on what to do because i dont have a clue.

One thing to check is the battery for charge/condition.
Make sure it has at least 12.5vdc & if it is liquid filled ensure all the cells are filled above the lower mark.
PLEASE GO TO MY WEBSITE AND REVIEW ON THIS
HERE YOU CAN GET THE LATEST NEWS AND ROCKING NEWS

----------------------------------
dainik bhasker

Electrical advice needed?
 

what type or gauge wireing should i use to run power from the main breaker box of the main house to a seperate breaker box approx - 30 yards away to set up power to a small 2 room apt , for the best continuity the thickness and the gawg is what im worried about mostly .also it will be about 10 feet to 15 feet high from house to house. how many lines should i run ? thank you for you time to help.

Make sure it has at least 13.5vdc & if it is liquid filled ensure all the cells are filled above the lower mark.
Hope this helps.

this is very good post

and if you want to get more please

dainik bhasker

Make sure it has at least 12.5vdc & if it is liquid filled ensure all the cells are filled above the lower mark.
Hope this helps.


this is nice post


PLEASE GO TO MY WEBSITE AND REVIEW ON THIS
HERE YOU CAN GET THE LATEST NEWS AND ROCKING NEWS

----------------------------------
dainik bhasker

I recently came across your article and have been reading along. I want to express my admiration of your writing skill and ability to make readers read from the beginning to the end. I would like to read newer posts and to share my thoughts with you.

Karen Millen Outlet North Face Jackets Outlet Moncler Vestes Moncler Outlet

Make sure it has at least 12.5vdc & if it is liquid filled ensure all the cells are filled above the lower mark.
Hope this helps