General Motorcycle Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

New Suzuki owner...engine sounds

Old Jun 28, 2005 | 11:53 PM
  #1  
scooter69's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2005
Posts: 10
From:
Default New Suzuki owner...engine sounds

I'm a first time Suzuki owner of a 2002 Bandit 1200S. The bike has 28000Km on it (approx 17.5K miles). The dealer told me that the ticking I hear when at idle is a typical Suzuki sound.

It's kinda like a PCV valve on a car ticking away or slightly noisey hydraulic lifters. Is there anything to worry about with this sound? I have another 2 weeks on waranty right now so I'll get it checked if it's not a normal sound.

It's not loud it just doesn't sound like a V-Twin (previous bike).

Runs really smooth and responds very well....needs a twist of the throttle when cold to start but that's about it.

Scooter[&:]
 
Old Jul 12, 2005 | 07:19 AM
  #2  
GSXRBOY's Avatar
Junior Member
Joined: Jul 2005
Posts: 27
Default RE: New Suzuki owner...engine sounds

Does it go away when you get up to normal operating temps???
 
Old Nov 10, 2005 | 11:12 PM
  #3  
GSXRBOY's Avatar
Junior Member
Joined: Jul 2005
Posts: 27
Default RE: New Suzuki owner...engine sounds

My brand new GSXR is doing this also but only when the outside temp is pretty low meaning cold engine.

Also remember that metals expand and contract under different temperatures. An engines tolerances may be in spec at the ideal operating temperature of 180ish degrees so if the engine is at 60 degrees then there may be slight noises.

Id say just let it warm up before you rev it or drive it to be sure you dont damage anything, unless you still hear the noises.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rallypacker
Boulevard M95, Boulevard M50
3
Aug 18, 2010 12:00 PM
Shifty_P
New Member Area
0
Jun 24, 2010 12:13 AM
esco4more
Suzuki Grand Vitara
0
Oct 6, 2008 06:01 AM
max49
New Member Area
0
May 2, 2008 06:05 PM
dan
New Member Area
0
Mar 3, 2007 05:15 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:31 AM.