Fly100- Honda Scanner
#1
08-23-2010, 02:54 AM
Fly100- Honda Scanner
FLY100 Hoda scanner LOCKSMITH VERSIONIt can do smart keys, No need to input password. The machine automatically calculates the password and enters the IMMO system.
With such a smart key, what FLY100 can do?
DTC reading and clearing (allows the user to read both permanent and temporary DTCs. Once the fault causing the DTC has been found and repaired the DTC tool can then be used to clear DTCs.)
Snapshot function (capture data relative to a trigger event)
Vehicle data display (value, line graph, or bar graph formats)
DLC locator diagrams
Data list display (real-time display of ECU parameters)
System Functional Tests (allows for more detailed testing of specific parts of the vehicle systems, where the ECU? support these tests (e.g. Window movement, Lighting, Vehicle Gauges and engine components)).
Onboard tutorial
Immobiliser
Odometer Rewrite
Hardware and software requirements:
PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later)
Hard disk drive with at least 400MB of free space
CD-ROM drive (if a high-speed Internet connection is not available)
RS232 port required to connect PC to IDT
Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)
Use for the following cars: All Honda model (Honda & Acura from 1992 to 2008)
want to know Honda Electronic Control System? Just visit Greebid Eshop!
With such a smart key, what FLY100 can do?
DTC reading and clearing (allows the user to read both permanent and temporary DTCs. Once the fault causing the DTC has been found and repaired the DTC tool can then be used to clear DTCs.)
Snapshot function (capture data relative to a trigger event)
Vehicle data display (value, line graph, or bar graph formats)
DLC locator diagrams
Data list display (real-time display of ECU parameters)
System Functional Tests (allows for more detailed testing of specific parts of the vehicle systems, where the ECU? support these tests (e.g. Window movement, Lighting, Vehicle Gauges and engine components)).
Onboard tutorial
Immobiliser
Odometer Rewrite
Hardware and software requirements:
PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later)
Hard disk drive with at least 400MB of free space
CD-ROM drive (if a high-speed Internet connection is not available)
RS232 port required to connect PC to IDT
Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)
Use for the following cars: All Honda model (Honda & Acura from 1992 to 2008)
want to know Honda Electronic Control System? Just visit Greebid Eshop!
Thread
Thread Starter
Forum
Replies
Last Post
